IPM Waterway Precautions

Release Time：2022-07-11Pageviews：348

Install the filter.
Remove the filter , clean the garbage inside.
The pump must be turned on for 3 to 4 hours when cleaning the pipes.
When the ambient temperature is low At the freezing point, when the equipment is no longer in use, the cooling water in the pipeline must be removed to avoid freezing and cracking of the waterway. If necessary, the residual cooling water in the waterway can be purged with compressed air.
To avoid power inside Condensation, the inlet water temperature should not be too low, and the temperature difference with the ambient temperature should not be greater than 5 ℃.
Access pipes must be After several times of flushing and connecting the Y-type filter valve in series, it is connected to the power cabinet.

640 (2).png

640 (3).png

640 (4).png

Previous：New energy-saving IPM power supply Next：Haitian electric furnace will be delivered soon